Jupiter

Recessed range suitable for exposed standard or micro-T bar ceilings. Manufactured from white powder coated steel. All fittings are suitable for a wide range of applications including office environments, reception areas etc.

We are in the process of modifying our entire Jupiter range to accommodate for Lumafix side arm suspension brackets. This will enable the fitting to be drawn up to the ceiling and the brackets can be used to support the fitting on the upstand of the "T" bar.

For more details, please see the Lumafix page.

It is possible to use the Jupiter fitting and Lumafix supports for plasterboard ceilings. However the flange of the standard Jupiter fitting is only 10mm wide and we can supply a special wider flanged fitting (20mm) specifically for plasterboard - please enquire.

The "Jupiter" fitting has a centrally mounted perforated metal diffuser with internal opal sheet to diffuse downward light. Upward light from the fluorescent tube(s) is reflected by means of 2 white curved metal reflectors producing a soft light and no sharp cut-off angle. All light from this fitting is indirect.

The "Jupiter Louvre" fitting has 2 perforated metal diffusers providing indirect light. Behind each diffuser there are either T5 or TC-L lamps. There is also a central aluminium Cat.2 louvre behind which is a T8, T5 or TC-L tube giving direct downwards light.

Jupiter LVR

Jupiter LVRNW

The Jupiter Louvre NW fitting gives both direct and indirect light. The twin lamps, positioned behind the New Wider aluminium VDT louvre, give direct light via the VDT louvre and indirect light via the perforated metal diffusers at each side of the louvre.

The Jupiter range has been designed with LG3:2001 and LG7 in mind.

Emergency - Maintained emergency conversion available - details here.

A stylish new addition to our popular Jupiter range.

This new "Dropped Basket" (DB) Jupiter fitting is available with a perforated metal controller (CP) or perforated metal controller with central inserted VDT louvre (LVR). In both cases the controller is dropped below the level of the ceiling to give additional upward light.

The body is made from white powder coated steel and the VDT louvre is made from polished aluminium. The dropped basket is fixed by special clips and hinged to allow re-lamping and routine maintenance quickly and safely without the need to remove the dropped basket completely.

Ideally suited for numerous applications including offices, schools, entrance halls and retail installations.

In lighting schemes, results of 30% light on the ceiling and 50% light on the walls can be achieved to comply with the LG7 recommendations in respect of light on the walls & ceilings as a % of the light on the working plane.

Jupiter DB with Louvre

Jupiter DB with Metal Perforated Controller

Suitable for 600 x 600 exposed T bar ceilings, standard or micro. Also suitable for plasterboard ceilings using side arm suspensions. Please enquire before ordering.

The CP (Centre Perf) is available with 3 x 14W or 24W T5 tubes and 2 x 40W or 55W TC-L lamps.

The LVR (Louvre) is available with 3 x 14W or 24W T5 tubes only.

3 hour maintained integral emergency (/E) available.

Also available with high frequency digital or analogue 1-10V dimming gear to order.